37 research outputs found
WiForceSticker: Batteryless, Thin Sticker-like Flexible Force Sensor
Any two objects in contact with each other exert a force that could be simply
due to gravity or mechanical contact, such as a robotic arm gripping an object
or even the contact between two bones at our knee joints. The ability to
naturally measure and monitor these contact forces allows a plethora of
applications from warehouse management (detect faulty packages based on
weights) to robotics (making a robotic arms' grip as sensitive as human skin)
and healthcare (knee-implants). It is challenging to design a ubiquitous force
sensor that can be used naturally for all these applications. First, the sensor
should be small enough to fit in narrow spaces. Next, we don't want to lay
cumbersome cables to read the force values from the sensors. Finally, we need
to have a battery-free design to meet the in-vivo applications. We develop
WiForceSticker, a wireless, battery-free, sticker-like force sensor that can be
ubiquitously deployed on any surface, such as all warehouse packages, robotic
arms, and knee joints. WiForceSticker first designs a tiny
~mm~~~mm~~~mm capacitative sensor design equipped
with a ~mm~~~mm antenna designed on a flexible PCB substrate.
Secondly, it introduces a new mechanism to transduce the force information on
ambient RF radiations that can be read by a remotely located reader wirelessly
without requiring any battery or active components at the force sensor, by
interfacing the sensors with COTS RFID systems. The sensor can detect forces in
the range of -~N with sensing accuracy of ~N across multiple
testing environments and evaluated with over varying force level
presses on the sensor. We also showcase two application case studies with our
designed sensors, weighing warehouse packages and sensing forces applied by
bone joints
Minimally Invasive Expeditionary Surgical Care Using Human-Inspired Robots
This technical report serves as an updated collection of subject matter experts on surgical care using human-inspired robotics for human exploration. It is a summary of the Blue Sky Meeting, organized by the Florida Institute for Human and Machine Cognition (IHMC), Pensacola, Florida, and held on October 2-3, 2018. It contains an executive summary, the final report, all of the presentation materials, and an updated reference list
Independent optical excitation of distinct neural populations
Optogenetic tools enable examination of how specific cell types contribute to brain circuit functions. A long-standing question is whether it is possible to independently activate two distinct neural populations in mammalian brain tissue. Such a capability would enable the study of how different synapses or pathways interact to encode information in the brain. Here we describe two channelrhodopsins, Chronos and Chrimson, discovered through sequencing and physiological characterization of opsins from over 100 species of alga. Chrimson's excitation spectrum is red shifted by 45 nm relative to previous channelrhodopsins and can enable experiments in which red light is preferred. We show minimal visual system–mediated behavioral interference when using Chrimson in neurobehavioral studies in Drosophila melanogaster. Chronos has faster kinetics than previous channelrhodopsins yet is effectively more light sensitive. Together these two reagents enable two-color activation of neural spiking and downstream synaptic transmission in independent neural populations without detectable cross-talk in mouse brain slice.PostprintPeer reviewe
Recommended from our members
Design of 3-D Printed Concentric Tube Robots
Concentric tube surgical robots are minimally invasive devices with the advantages of snake-like reconfigurability, long and thin form factor, and placement of actuation outside the patient's body. These robots can also be designed and manufactured to acquire targets in specific patients for treating specific diseases in a manner that minimizes invasiveness. We propose that concentric tube robots can be manufactured using 3-D printing technology on a patient- and procedure-specific basis. In this paper, we define the design requirements and manufacturing constraints for 3-D printed concentric tube robots and experimentally demonstrate the capabilities of these robots. While numerous 3-D printing technologies and materials can be used to create such robots, one successful example uses selective laser sintering to make an outer tube with a polyether block amide and uses stereolithography to make an inner tube with a polypropylene-like material. This enables a tube pair with precurvatures of 0.0775 and 0.0455 mm-1, which can withstand strains of 20% and 5.5% for the outer and inner tubes, respectively
Robot-guided sheaths (RoGS) for percutaneous access to the pediatric kidney: Patient-specific design and preliminary results
Robot-guided sheaths consisting of pre-curved tubes and steerable needles are proposed to provide surgical access to locations deep within the body. In comparison to current minimally invasive surgical robotic instruments, these sheaths are thinner, can move along more highly curved paths, and are potentially less expensive. This paper presents the patientspecific design of the pre-curved tube portion of a robot-guided sheath for access to a kidney stone; such a device could be used for delivery of an endoscope to fragment and remove the stone in a pediatric patient. First, feasible two-dimensional paths were determined considering workspace limitations, including avoidance of the ribs and lung, and minimizing collateral damage to surrounding tissue by leveraging the curvatures of the sheaths. Second, building on prior work in concentric-tube robot mechanics, the mechanical interaction of a two-element sheath was modeled and the resulting kinematics was demonstrated to achieve a feasible path in simulation. In addition, as a first step toward three-dimensional planning, patient-specific CT data was used to reconstruct a threedimensional model of the area of interest. Copyright © 2013 by ASME
Recommended from our members
Design of a Compact Actuation and Control System for Flexible Medical Robots
Flexible medical robots can improve surgical procedures by decreasing invasiveness and increasing accessibility within the body. Using preoperative images, these robots can be designed to optimize a procedure for a particular patient. To minimize invasiveness and maximize biocompatibility, the actuation units of flexible medical robots should be placed fully outside the patient's body. In this letter, we present a novel, compact, lightweight, modular actuation, and control system for driving a class of these flexible robots, known as concentric tube robots. A key feature of the design is the use of three-dimensional printed waffle gears to enable compact control of two degrees of freedom within each module. We measure the precision and accuracy of a single actuation module and demonstrate the ability of an integrated set of three actuation modules to control six degrees of freedom. The integrated system drives a three-tube concentric tube robot to reach a final tip position that is on average less than 2 mm from a given target. In addition, we show a handheld manifestation of the device and present its potential applications
Design and Fabrication of Concentric Tube Robots: A Survey
International audienceConcentric tube robots (CTRs) have drawn significant researchattention over the years, particularly due to their applications inminimally invasive surgery (MIS). Indeed, their small size,flexibility, and high dexterity enable several potential benefitsfor MIS. Research has led to an increasing number of discoveriesand scientific breakthroughs in CTR design, fabrication, control,and applications. Numerous prototypes have emerged from differentresearch groups, each with their own design and specifications.This survey paper provides an overview of the state-of-the-art ofthe mechatronics aspects of CTRs, including approaches for thedesign and fabrication of the tubes, actuation unit, and endeffector. In addition to the various hardware and associatedfabrication methods, we propose to the research community, aunifying way of classifying CTRs based on their actuation unitarchitecture, as well as a set of specification details forevaluation of future CTR prototypes. Finally, we also aim tohighlight the current advancements, challenges, and perspectives ofCTR design and fabrication